Products & Services

BuildingCivilRepair & StrengtheningOther Products & Services


Other Products and Services


Tetron CD pot bearing

The Tetron CD pot bearing is composed of an elastomer disk confined in a cylindrical space limited by a hollow base (the pot) and a piston.

Thus the elastomer behaves like an uncompressible liquid. It can transmit very high loads and absorb rotations of the structure.

If the pot bearing is provided with a sliding plate, it becomes multi-directional and a guide can be added to make it single directional.

There are three available pot bearing types which are fixed, free sliding and guided sliding.

Please click here to request for our brochure


CIPEC Expansion Joint

CIPEC expansion joints are designed to enable continuous traffic between two structures, accommodating structural movements due to creep, shrinkage effects, temperature variations and deformations under live load.

They are suitable for all reinforced concrete, prestressed concrete, composite and steel structures, and particularly for bridge decks. There are three range of expansion joints which are small movement expansion joints (JEP, WR and WOSd), medium movement joints (Wd) and large movement joints (WP).

Please click here to request for our brochure


Elastomeric bearings

A laminated elastomeric bearing is an elastomeric rubber block reinforced with steel plates vulcanised when built, This bearing is the connection between a structure and its support, and should make possible elastic deformation when transmission of normal forces, horizontal movement, rotation of the structure in any direction and transmission of horizontal forces (within defined limits).

There are four types of elastomeric bearings which are standard bearings, bearings with anchor plates, bearing with sliding surface and restrained bearings.

Please click here to request for our brochure


Freyssibar developed by Freyssinet, this prestressing system comprises of a wide range of fully threaded bar and complementary anchoring, coupling and extension devices. It is used for post-tension cables, prestressed ground anchors, and for any application involving temporary or permenant tie rods, such as lifting, suspension, prestressed splices, etc. The bars are hot rolled from high strength alloyed steel.

The standard range of nominal diameters are 26.5mm, 32mm, 36mm, 40mm and 50mm. Larger diameter bars can be delivered on request.

Please click here to request for our brochure



Structural Health Monitoring and Assessment

PSC Freyssinet provides consultancy services, investigation services and monitoring systems to assess the health of an existing structure to private owners, contractors and consultants.

Our professional devote themselves to understanding the risks of deterioration for structures and implements software solutions, inspection, maintenance and monitoring systems to ensure structures are durable and serviceable at low cost.

Please click here to request for our brochure

Mircopiling services

Micropile can be installed with relatively small drilling equipment by rotation drilling method, single or in group, under limited access and low headroom conditions. It can also reduce or eliminates the risk of structural damages caused due to vibrations. Micropile is very feasible when it is used in extension or addition and alteration projects. PSC Freyssinet involved in more than 40 micropilling works in extension or addition and alteration projects since 1985.

Please click here to request for our brochure


Other Services

Our other services includes

  • Replace of bearings and road joints.
  • Structural lifting work.
  • Post-tensioning tie-back work.

[ Back To Top ]